SBM Quality Policy : high efficiency, accurate manufacture, strict control, seeking for perfection.
SBM Management Concept :
reasonable, considerate, accurate, effective.
Hydraulic Cone Crusher
Overview of Hydraulic Cone Crusher
HPC series hydraulic Cone crusher is a new type of Cone crusher with international advanced level. It is designed by our company, which brings in Germanic technology. It greatly increased the production capacity, crushing efficiency and the application fields, which is suitable for replacing spring Cone crusher and common hydraulic cone crusher in the mining and construction industry, and is the most ideal equipment for large-scale stone factory and mining crusher.
Application of Hydraulic Cone Crusher
HPC series Cone crusher with high-efficiency and hydraulic pressure is widely used in mining, cement factory, sand& stone industry. It is used for secondary and fine crush of all kinds of rocks, whose pressure strength resistance is under 350Mpa, such as iron ores, nonferrous metal ores, basalt, granite, limestone, sandstone, cobble etc.
Main Features and Benefits of Hydraulic Cone Crusher
1. The new series of HPC Cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2. The HPC Cone crusher also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5. The HPC Cone crusher is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together. 6.The concave and mantle made by high manganese steel. Owing to the change of the concave’s style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
Working principle of Hydraulic Cone Crusher
Working parts of spring cone crusher is two coniform trim ends. One is fixed cone No, 2 (called outer cone), the other is movable cone No, 1 (called inner cone), see the drawing, Fixed cone 2 is a part of mainframe and It is layed quietly. Movable cone 1 Is reamed on point O, and it's lower end inserts in the eccentric bush movably. Therefore, mass axis OO1 of fixed cone crossover with mass axis OOl of movable cone for a oblique angle. When OOl rotates surrounding OO1, the movable cone will make eccentric movement along with the inner surface of fixed cone. In the area where the movable cone turns closer to the fixed cone, the material will be extruded, collided. This area turns to be crushing chamber, In the area where movable cone stands far from fixed cone, the crushed material will be discharged from the end of cone because of its self weight. This area Is called discharged.
| Model | Cavity(coarse/fine) | Discharge setting min.(mm) | Capacity(t/h) | Motor Power(kW) | Movable cone diameter(mm) | Weight(t) |
| HPC-160 | 425 | 50-100 | 45-80 | 55 | 500×750 | 10.1 |
| 425 | 50-100 | 45-80 | 55 | 500×750 | 10.1 | |
| HPC-220 | 500 | 65-160 | 70-120 | 55-75 | 6000×900 | 15.5 |
| 630 | 80-140 | 130-260 | 110 | 750×1060 | 28 | |
| HPC-315 | 750 | 95-165 | 220-380 | 110-132 | 900×1200 | 50 |
| 850 | 195-265 | 230-380 | 132 | 1000×1200 | 57 | |
| HPC-400 | 1020 | 150-300 | 400-800 | 160-220 | 1200×1500 | 100.9 |
| 250 | 25-105 | 20-90 | 55-75 | 300×1300 | 11 |